Well Water Remediation
REMOVAL OF MANGANESE, IRON AND SUPHUR
Self-Cleaning Maintenance-Free Iron, Sulfur, Manganese Removal System
WQA-Certified Media with 4 -Year Performance
Excellent Performance at a Low Price
e mail
call us at 1 800 968 9355 and /or fax well water tests to 925 938 9019 to determine if this FTP unit will handle your iron , manganse and suphur load.
Remove Iron, Manganese and Sulfur (that rotten egg odor) From Your Well Water
Effective and Simple, No Routine Maintenance Required!
Catalox is an WQA Certified high purity, high capacity filtration media for
removal of hydrogen sulfide (sulfur or "rotten-egg" odor), iron
and manganese.
The PurHome FTP Series is an automatic backwash system that consists mainly
of Catalox (formerly called Filox) with a Garnet base. Catalox is a WQA
Certified high purity, high capacity filtration media for removal of
hydrogen sulfide (sulfur), iron and manganese. Garnet will filter sediments
and oxidized iron down to the 20-30 micron range.
* Removes Iron up to 27 ppm
* Removes Hydrogen Sulfide up to 17 ppm
* Removes Manganese up to 11 ppm
Catalox works on the principal of a catalyst reaction, but itself remains
unchanged. The Sulfur, Iron and Manganese in your water will oxidize on the
Catalox Media and a simple backwashing cleans the bed of media.
There is no routine maintenance on this system - no filters to change, no
salt or regenerate of any kind. It is a simple design, and easy to install,
yet a very effective and reliable water treatment system. The media will
need to be changed every 4 years, on average.
MEDIA REPLACMENT AFTER 4 YEARS IS $699
Please Note: Filtration is best when pH is above 6.6. If your pH is lower,
the water is acidic making it difficult to fully oxidize the contaminants.
Acidic water is also very damaging to plumbing, fixtures and appliances.
If you have a low pH, you can simply add Aeration. Or, for pH 6.4 and below,
add one of our pH neutralizing systems.
+++++++++++++++++++++++++++++++++++
Specifications
Valve: Fleck ProFlo, Self-backwashing.
Plumbing: 3/4" or 1" MPT, 1/2" drain line
PurHome FT-8P
Price: $995.00
Dimensions: 8" diameter x 51" high
Flow rate: 6 GPM
Backwash Min* 8 GPM
PurHome FT-9P
rice: $1095.00
Dimensions 9" diameter x 55" high
Flow rate: 8 GPM
Backwash Min*: 10 GPM
PurHome FT-10P
Price: $1195.00
Dimensions: 10" diameter x 51" high
Flow rate: 10 GPM
Backwash Min* 12 GPM
PurHome FT-12P
Price: $1295.00
Dimensions 12" diameter x 55" high
Flow rate: 12 GPM
Backwash Min*: 15 GPM
The FTP Catalox systems require a certain amount of water available for backwash. This is important to ensure adequate backwash to regenerate the media bed. Please be sure that you have enough GPM to backwash prior to purchase.
WE NEED TO KNOW WIDTH OF PIPES. 3/4 OR AN INCH
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
* High capacity for removal of iron, manganese and sulfur odor with no maintenance
* Fleck ProFlo Control Valve comes pre-programmed!
Just enter the day and time
* All electronic backwash valves are "set it and forget it", but our Fleck
ProFlo valve may easily be re-programmed if ever needed to fit your specific
needs for better performance.
* By-pass valve included at no additional charge!
* Catalox media shipped separately so the system will not be too heavy when
transporting to the installation site (we even include the funnel)
* Long lasting, self-cleaning media means no filters to change.
* Ready to install! Includes 100 ft. of drain line and drain line clamp
* Media lasts about 4 Years.
* Full 5-year warranty on all parts: 10 years on tank.
* Free shipping in the continental U.S.
* 6-Month Money-Back Satisfaction Guarantee.
=================================================================
SOME OF YOU QUESTIONS?
Q: Are there filters that need to be changed?
A: No, there are no particulate filters involved. This system is
maintenance-free for at least 4 years.
Q: How often should the media in the tank be replaced?
A: The media in the tank will last approximately 4 years.
Q: Can this filter be plumbed before my pressure tank?
A: No, you will need to plumb this filter on your main water line after your
pressure tank.
Q: How often will the FTP Catalox Backwash?
A: This system will be pre-programmed by the factory to backwash every three
days. These setting can easily be modified to meet your specific needs.
Q: How much water is used for each backwash?
A: The FTP Series uses about 80 gallons of water per backwash.
Q: How easy is it to install the FTP Catalox system?
A: Detailed installation instructions and supplied fittings including
by-pass handles are included to make it easy to understand and install the
FTP Catalox system. Also, you or your plumber may contact our knowledgeable
Customer Service Technicians for further assistance during the installation
process. Installation instructions are available.
Q: Does this system address hard water?
A: No, this system is designed to remove only iron, general sulfur, and
manganese.
++++++++++++++++++++++++++++++++++
Effective reduction of iron, sulfur and manganese
Durable material with long service life and low annual attrition of media
bed. No chemical regeneration required; only automatic periodic backwashing
Catalox Removal Capacity:
* Removes Iron up to 27 ppm
* Removes Hydrogen Sulfide up to 17 ppm
* Removes Manganese up to 11 ppm
Warranty: 10 Years Tank and 5 Years on Components.
6 Month Satisfaction Guarantee
call us at 1 800 968 9355 and /or fax well water tests to 925 938 9019 to determine if this FTP unit will handle your iron , manganse and suphur load.
daliya@nontoxic.com
e mail