|
InterioIr WallsNew drywall
Safecoat New Wallboard Primecoat HPV (1coat @300-350 sq.ft/gal*.)
Safecoat Flat, Pearl, Eggshell or Semi Gloss (2c coats@350 sq.ft/gal.)
Naturals Flat or Pearl (2c @350 sq.ft/gal.)
Previously painted (water or oil based)
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat Flat, Pearl, Eggshell or Semi Gloss (2c @350sq.ft/gal.)
Naturals Flat or Pearl (2c @350 sq.ft/gal.)
Unsealed Masonry & Brick
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat All Purpose Exterior Satin (2c @350 sq.ft/gal.)
Safecoat Flat, Pearl, Eggshell or Semi Gloss (2c @350sq.ft/gal.)
Naturals Flat or Pearl (2c @350 sq.ft/gal.)
Wall tile (Small, light tiles only)
Safecoat 3 in 1 Adhesive (50-120 sq. ft/gal. based on trowel used)
Safecoat Grout Sealer (200 sq. ft/quart)
Interior Woodwork
New unsealed – to be painted
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat Trim & Door Enamel (2c @350 sq.ft/gal.)
Previously painted (water or oil based)
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat Trim & Door Enamel (2c @350 sq.ft/gal.)
New or resanded: Clear finish for wood
Safecoat DuroStain (brush on wipe off application @350 sq.ft/gal.)
Safecoat Polyureseal BP Gloss or Satin (3c @350-500 sq.ft/gal.)
or Safecoat Acrylacq (3c @350-500sq.ft/gal.)or
AFM Naturals Oil Wax Finish (2c @200-600sq.ft./gal.)
Exterior Walls
New unsealed wood and trim
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat All Purpose Exterior Satin (2c @350 sq.ft/gal.) or
AFM Naturals Clear Penetrating Oil (2c @200-600sq.ft./gal.)
Previously painted (water or oil based)
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat All Purpose Exterior Satin (2c @350 sq.ft/gal.)
Unsealed Masonry & Brick
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat All Purpose Exterior Satin (2c @350 sq.ft/gal.)
Previously painted masonry
Safecoat Transitional Primer (1c @300-350 sq.ft/gal.)
Safecoat All Purpose Exterior Satin (2c @350 sq.ft/gal.)
Masonry or wood walls:Clear
Safecoat Water Shield (2c @350-400sq.ft/gal.)
Interior Floors
New unsealed or sanded wood, bamboo or cork
DuroStain if needed (brush on wipe off application @350 sq.ft/gal.)
Safecoat Polyureseal BP Gloss or Satin (3c @350-500 sq.ft/gal.)
or AFM Naturals Oil Wax Finish (2c @200-600 sq.ft./gal.)
Unsealed porous stone/masonry
Safecoat MexeSeal (semi-gloss finish) (3c @350 sq.ft/gal.)
or for a dull finish Safecoat Water Shield (3c @350-400 sq.ft/gal.)
. Because of the varying circumstances affecting each job, including environmental factors, surface variations and application techniques, it is the user’s responsibility to determine the suitability
and safety of the product for any particular application. We particularly recommend that users always test in small inconspicuous areas before application to the entire surface.
Interior Floors (cont.)
Unpolished limestone, travertine and marble
Safecoat Penetrating Water Stop (1c @250 sq.ft/gal.) or
Safecoat MexeSeal (semi-gloss finish) (3c @350 sq.ft/gal.)
Unsealed concrete. If paint finish is desired:
Safecoat DecKote Concrete Paint (2c @350 sq.ft/gal.)
If clear semi-gloss finish is desired:
Safecoat Mexeseal (3c @350 sq.ft/gal.)
or Safecoat Penetrating Water Stop for flat water repellency-only finish.
Exterior Wood
New or resanded wood siding
Safecoat DuroStain (brush on wipe off application @250 sq.ft/gal.) or
Safecoat Water Shield (flat Finish) (2c @350-400 sq.ft/gal.) or
AFM Naturals Clear Penetrating Oil (2c @200-600sq.ft./gal.)
Wood decks
AFM Naturals Clear Penetrating Oil (2c @200-600 sq.ft./gal.)
Unsealed concrete. If paint finish is desired:
Safecoat DecKote with or without aggregate (2c @350 sq.ft/gal.)
Solutions to toxic new carpet but not wool.see mystical for wool
Cleaning & Sealing
SafeChoice Carpet Shampoo Concentrate (1 qt.=1200 sq. ft.)
SafeChoice Carpet Seal carpet fiber and backing sealer (300 sq.ft./gal.)
SafeChoice Lock Out fiber sealer (300 sq.ft./gal.)
Installation
Safecoat 3 in 1 Adhesive (50-120 sq. ft/gal. based on trowel used)
Roofing
Flat roofs
Safecoat DynoSeal (4c @250 sq.ft/gal.) must topcoat with
Safecoat RoofGuard (2c @250 sq.ft/gal., fully tintable)
Roof fixture seams
Safecoat DynoFlex Natural (100 sq.ft/gal. at 15 mil) can be
topcoated with DynoSeal/RoofGuard
Foundations
Exterior below grade
Safecoat DynoSeal (4c @100 sq.ft/gal.)
Above grade
Safecoat DynoSeal (2c @250 sq.ft/gal.) must topcoat with
Safecoat RoofGuard (2c @250 sq.ft/gal., fully tintable)
Structural Materials to block formaldehdye fumes from particle board
Plywood, particle board, OSB
Safecoat Safe Seal (1+c @350sq.ft/gal.)
Previously painted surface
If clear coat desired: Safecoat Hard Seal (multiple c @300sq.ft/gal.)
multiple coats may be necessary based on personal tolerance.
(Note: white surfaces may develope golden patina.)
*Coverage rates are theoretical and will vary according to methods of application and surface porosity.
|